MFreeformAnalogEq 6.00 changes
- Huge memory and GUI optimizations, new knob based interfaces.
- Each oscillator can now also be controlled using harmonics instead of shape.
- Added "double" envelope shape type.
- Analyzer & sonogram can now optionally be enabled even when the GUI is hidden.
- A-H presets now send automation when changed.
- MIDI note controllers now react on pitch-bend immediately.
- Added feedback phase invert and saturation for phasers.
- Added second tape mode for flangers.
- Added knob mode for most plugins, which turns their slider based GUI into knob based one.
- MSpectralDynamics can now capture the threshold curve based on the input signal.
- MDynamics and MMultiBandDynamics weren't showing correct shapes for upwards expander.
- Added IR phase invert and left/right delays for MMultiBandConvolution.
- Fix: Drag & drop wave file for analysis didn't work in MAutoEqualizer.
- Fix: MAutoEqualizer could crash under specific circumstances when automating gain.
MFreeformAnalogEq 5.06 changes
- All plugins are now Mac64 compatible.
- Improved GUI behaviour, especially on Apple.
- Analyzers & sonograms now work only if the plugin window is open to save CPU.
- Fix: Plugins were silent in Sonar with mono tracks in L+R mode.
- Fix: Analyzer peak points were not accurate.
MFreeformAnalogEq 5.05 changes
- Added stabilization parameter for modulator pitch detectors to avoid quick changes.
- Improved highlight of the selected band type in parametric equalizers.
- Mono/Stereo have been renamed to Mid/Side.
- Installers of separate plugins now provide enabling or disabling interfaces.
- Fix: MDynamicEq and MAutoDynamicEq were not working correctly in surround mode.
MFreeformAnalogEq 5.04 changes
- All plugins can now change default settings - check the big button in Settings/Settings.
- Low-quality zero-latency upsampling algorithm highly improved.
- All multiband plugins now have multiple analog crossovers with slope from 12dB/oct to 120dB/oct.
- You can temporarily activate band link by holding alt key and moving a parameter in multiband plugins.
- Added detection range for modulator's pitch detector to filter out frequencies outside of range of the particular instrument.
- Plugins now update all parameters after a preset has been loaded.
- Optimized multiple parameter automation.
- Parametric equalizers now have first band low-shelf and last high-shelf by default.
- Improved flicker free resizing in some hosts.
- All textual edits of time are now in milliseconds to avoid numbers like 0.001.
- Multiband plugins now remember 0%/100% dry/wet buttons when browsing presets.
- Channel modes are now available from the main screen.
- Fix: Smothness didn't work correctly upon startup in many plugins containing an analyser.
- Band editors in equalizers now correctly update when the parameters are being automated.
- Equalizers now send automation only to relevant parameters of each band.
- Added a "listen to frequency" feature to all parametric equalizers.
- Analyzers in equalizers can now process input signal instead of the output.
- Equalizers show band settings on right-click to the enable "circle" button.
- Added invert gain feature for equalizer bands.
- Fix: MFreeformAnalogEq didn't correctly show equalization curve when range has changed.
- Fix: Smothness didn't work correctly upon startup in many plugins containing an analyser.
MFreeformAnalogEq 5.03 changes
- It is now possible to override the default editor size in Settings.
- Added threshold and high-accuracy mode to pitch mode of modulators.
- Added check for updates feature into each plugin's settings.
- Fix: VST3 was causing crashes under some hosts and specific configurations.
- Fix: Envelope draw mode didn't work well with snap to grid enabled.
- Fix: Popup windows with some keyboard shortcuts could lead to a crash on Mac.
- Fix: Upsampling latency being reported was invalid.
MFreeformAnalogEq 5.02 changes
- LU meters can now show momentary, short-term and integrated loudness.
- Added pitch detection mode for modulators.
- Added higher-quality filters for upsampling rates above 200kHz.
- Easy screen active presets now automatically attach mouse wheel and MIDI controllers from 21 to easy screen knobs.
- Optimized updating of user interface when hidden.
- Random modulator mode now works even in wave editors, which do not provide tempo and position.
- Styles are now installed to both admin & user data folders to avoid problems with systems with user accounts.
- Fix: Mono->Stereo processing could cause crashes in some hosts such as bidule.
- Fix: Delete and backspace keys have been swapped on Mac.
- Fix: Loudness meters text value was showing "silence" with values under 0 LU.
MFreeformAnalogEq 5.01 compatibility update changes
Click here for information about upgrading to 5.00 if you are using an older version.
- Surround is now off by default, because it causes problems with some hosts (known are FL Studio and Studio One). If you use surround processing, please enable "Activate surround" in the plugin settings, it will enable all plugins at once.
- Plugins can now access additional volumes on Mac OS X.
- Band editor in equalizers doesn't close when clicking on a band type any more and shows filter steepness.
- Fix: Plugins could crash in AU when requested mono to stereo configuration.
- Fix: Styles are now moved to user data folder, because some computers have permission problem with all-users directory.
- Fix: MFilter caused massive gain in parallel mode in some special circumstances.
- Fix: Analyzer in equalizers didn't show correct spectrum if activated after upsampling change.
- Fix: MMultiBandConvolution didn't remember custom paths correctly on Mac OS X.
MFreeformAnalogEq 5.00 changes
Click here for information about upgrading to 5.00
- Dual user interfaces -
most commercial plugins now contain 2 interfaces, a simple default one with
several predefined modes, but just a few controls, and an advanced one.
This makes the plugins not only extremely versatile, but also quick and easy-to-use.
- Unique new analysis engine for MAnalyzer and all equalizers -
new analysis engine is faster, more accurate and provides a whole new range of
unique features, such as micro-sonograms, full sonograms, super-resolution
(providing high resolution for low frequencies keeping speed for the high frequencies),
prefilters (for loudness curves) or deharmonization (for easier fundamental frequencies analysis).
- Plugins are now categorized under VST and VST3 -
with more than 55 plugins it started to be hard to find the plugin you need,
therefore they are now categorized by purpose to Dynamics, EQs etc.
With VST3 they also fit the standardized structure in your host (if it supports it).
- Added next/previous preset buttons.
- Added A/B switch to swap between previous two A-H presets.
- Added visual areas for equalizers.
- Added 0% & 100% modes for global dry/wet for all multiband plugins.
- Increased accuracy when dragging Q in equalizers.
- Added "use first parameter's range" mode for modulators and multiparameters.
- Added a few shortcuts to control zooming in graph editors.
- Added global surround switch useful to make the plugins more compatible with some hosts.
- Added resizing arrow for resizable windows.
- Added smooth 2 envelope point mode.
- Upsampling range extended to 16x.
- Multiband peakmeters can now show different channels in surround.
- Optimized preset and settings storage.
- Preset exchange is now enabled by default, can be disabled in Settings.
- Fix: Resizing windows with splitters changed ratio of the splitters.
- Fix: Resizable windows were sometimes showing arrow cursor over a position, where the window couldn't be resized.
- Fix: Demoversions with sidechain were crashing occasionally.
- Fix: Plugins with sidechain were occasionally crashing on Mac AU.
- Fix: A Windows message was poping when trying to access an unavailable drive.
- Fix: Upsampling latency wasn't reported correctly.
- Fix: Improved automation support with Ableton Live.
- Fix: Plugins didn't store bypass state.
- Fix: Multiparameters in switch mode were showing inverted state.
- Fix: Alt+Click in a graph editor caused maximum zoom, which is now disabled.
- Fix: Units in zoomed mode were sometimes showing invalid grid lines.
- Fix: Temp gain wasn't updated when automated/modulated.
MFreeformAnalogEq 4.02 changes
- Graph editors now show smart units even in zoomed mode and snap-to-grid works as well.
- Fix: Updaters didn't work on Windows with some specific paths.
MFreeformAnalogEq 4.01 changes
- Minor fixes and optimizations.
MFreeformAnalogEq 4.00 changes
- Major performance improvements - our plugins are now even faster than before
on modern processors. We measured processing improvements of up to 300% with some plugins and
user interface is now much faster as well, especially on Mac OS X.
- Online preset exchange - all plugins can now automatically
share your presets on our servers and download new ones (if enabled of course).
This way everyone can have an unbelievable set of presets using our extremely versatile plugins.
We are building a community and you can be a part of it!
-
- ADSR editors (e.g. in modulators) can now have custom shapes.
- Added step-sequencer generator into any envelope/graph editor.
- When activating you can now use drag & drop, clipboard and also locate the licence file using a browser.
- Fix: Trigger and switcher multiparameter modes weren't working correctly.
- Fix: Modulators and multiparameters weren't learning correct parameters of signal editor.
- Fix: Plugins could crash on Win64 when project exceeded 2GB.
- Fix: Plugins crashed when moving a multiparameter during learning.
MFreeformAnalogEq 1.01 changes
- Kernel highly optimized, especially for plugins with visualization.
- Added envelope editor snap-to-grid feature and advanced envelope editor menu.
- Added stairs & pulses envelope point mode.
- Plugins are now temporarily bypassed for time consuming actions such as loading presets.
- Now the plugins released in bundles can also accept single plugin licences for easier installation and activation.
- Fix: MFreeformAnalogEq was reporing an invalid source data for Q < 0.1.
- Fix: Occasional freezing under problematic hosts such as Wavelab.
- Fix: Mono/stereo encoding was sometimes failing in Logic.
- Fix: Copy&paste of modulators could result in a hang.
- Fix: Installer could hang on some multiprocessor systems.
Download the newest version here.
If not activated, the software stays in demo mode, which
generates noise from time to time and opens our website on start-up and
contains a clickable region, which opens our website.
To evaluate this software it is recommended to download
MTotalBundle which contains
all of our plugins.
 | Windows (32-bit) (6.00, 4 MB) Windows (64-bit) (6.00, 5 MB)
Download & run. It is safe to install the software if you have
an older version already installed.
|
 | Mac OS X (32-bit & 64-bit) (6.00, 7 MB)
Download & run. It is safe to install the software if you have
an older version already installed.
|
Updates
To update the software you have following choices:
a) Use new installer, there is no need to uninstall your current installation (recommended).
b) Download and run the update installer bellow.
c) Use Update manager to install all necessary updates automatically.
 | |  | Please use the newest installer from above to get the current version. There is no need to uninstall previous version. |
Buy now! It's quick and easy!
Click on the button below to perform purchase via PayPal.
You will receive your license key a few minutes after the payment.
If you do not receive your key within ten minutes, please forward your payment receipt to our support via
info@meldaproduction.com and we will manually send you your license key again.
Note that free-for-life updates apply for all our effects and bundles.
Therefore once you buy an effect, all improvements will be free for you forever.
If you buy a bundle, even all effects added to the bundle later will be free for you!
79 EUR 108 USD
Bundles
This software is available also in following bundles.
But purchasing a bundle you get much better price and the
free-for-life updates gives you right to any plugins we
will release and add to the bundle for free.
| MTotalBundle | 599 EUR 822 USD |
Education discounts
Are you a student? Teacher? You can have a 50% discount!
Click here to read more about education discounts.
Get social