MLimiter 5.06 changes

• All plugins are now Mac64 compatible.
• Improved GUI behaviour, especially on Apple.
• Analyzers & sonograms now work only if the plugin window is open to save CPU.
• Fix: Plugins were silent in Sonar with mono tracks in L+R mode.
• Fix: Analyzer peak points were not accurate.

MLimiter 5.05 changes

• Added stabilization parameter for modulator pitch detectors to avoid quick changes.
• Improved highlight of the selected band type in parametric equalizers.
• Mono/Stereo have been renamed to Mid/Side.
• Installers of separate plugins now provide enabling or disabling interfaces.
• Fix: MDynamicEq and MAutoDynamicEq were not working correctly in surround mode.

MLimiter 5.04 changes

• All plugins can now change default settings - check the big button in Settings/Settings.
• Low-quality zero-latency upsampling algorithm highly improved.
• All multiband plugins now have multiple analog crossovers with slope from 12dB/oct to 120dB/oct.
• You can temporarily activate band link by holding alt key and moving a parameter in multiband plugins.
• Added detection range for modulator's pitch detector to filter out frequencies outside of range of the particular instrument.
• Plugins now update all parameters after a preset has been loaded.
• Optimized multiple parameter automation.
• Parametric equalizers now have first band low-shelf and last high-shelf by default.
• Improved flicker free resizing in some hosts.
• All textual edits of time are now in milliseconds to avoid numbers like 0.001.
• Multiband plugins now remember 0%/100% dry/wet buttons when browsing presets.
• Channel modes are now available from the main screen.
• Fix: Smothness didn't work correctly upon startup in many plugins containing an analyser.

MLimiter 5.03 changes

• It is now possible to override the default editor size in Settings.
• Added threshold and high-accuracy mode to pitch mode of modulators.
• Added check for updates feature into each plugin's settings.
• Fix: VST3 was causing crashes under some hosts and specific configurations.
• Fix: Envelope draw mode didn't work well with snap to grid enabled.
• Fix: Popup windows with some keyboard shortcuts could lead to a crash on Mac.
• Fix: Upsampling latency being reported was invalid.

MLimiter 5.02 changes

• LU meters can now show momentary, short-term and integrated loudness.
• Added pitch detection mode for modulators.
• Added higher-quality filters for upsampling rates above 200kHz.
• Easy screen active presets now automatically attach mouse wheel and MIDI controllers from 21 to easy screen knobs.
• Optimized updating of user interface when hidden.
• Random modulator mode now works even in wave editors, which do not provide tempo and position.
• Styles are now installed to both admin & user data folders to avoid problems with systems with user accounts.
• Fix: Mono->Stereo processing could cause crashes in some hosts such as bidule.
• Fix: Delete and backspace keys have been swapped on Mac.
• Fix: Loudness meters text value was showing "silence" with values under 0 LU.

MLimiter 5.01 compatibility update changes

Click here for information about upgrading to 5.00 if you are using an older version.

• Surround is now off by default, because it causes problems with some hosts (known are FL Studio and Studio One). If you use surround processing, please enable "Activate surround" in the plugin settings, it will enable all plugins at once.
• Plugins can now access additional volumes on Mac OS X.
• Band editor in equalizers doesn't close when clicking on a band type any more and shows filter steepness.
• Fix: Plugins could crash in AU when requested mono to stereo configuration.
• Fix: Styles are now moved to user data folder, because some computers have permission problem with all-users directory.
• Fix: MFilter caused massive gain in parallel mode in some special circumstances.
• Fix: Analyzer in equalizers didn't show correct spectrum if activated after upsampling change.
• Fix: MMultiBandConvolution didn't remember custom paths correctly on Mac OS X.

MLimiter 5.00 changes

Click here for information about upgrading to 5.00

• Dual user interfaces - most commercial plugins now contain 2 interfaces, a simple default one with several predefined modes, but just a few controls, and an advanced one. This makes the plugins not only extremely versatile, but also quick and easy-to-use.
• Unique new analysis engine for MAnalyzer and all equalizers - new analysis engine is faster, more accurate and provides a whole new range of unique features, such as micro-sonograms, full sonograms, super-resolution (providing high resolution for low frequencies keeping speed for the high frequencies), prefilters (for loudness curves) or deharmonization (for easier fundamental frequencies analysis).
• Plugins are now categorized under VST and VST3 - with more than 55 plugins it started to be hard to find the plugin you need, therefore they are now categorized by purpose to Dynamics, EQs etc. With VST3 they also fit the standardized structure in your host (if it supports it).
• Added next/previous preset buttons.
• Added A/B switch to swap between previous two A-H presets.
• Added 0% & 100% modes for global dry/wet for all multiband plugins.
• Increased accuracy when dragging Q in equalizers.
• Added "use first parameter's range" mode for modulators and multiparameters.
• Added a few shortcuts to control zooming in graph editors.
• Added global surround switch useful to make the plugins more compatible with some hosts.
• Added resizing arrow for resizable windows.
• Added smooth 2 envelope point mode.
• Upsampling range extended to 16x.
• Multiband peakmeters can now show different channels in surround.
• Optimized preset and settings storage.
• Preset exchange is now enabled by default, can be disabled in Settings.
• Fix: Resizing windows with splitters changed ratio of the splitters.
• Fix: Resizable windows were sometimes showing arrow cursor over a position, where the window couldn't be resized.
• Fix: Demoversions with sidechain were crashing occasionally.
• Fix: Plugins with sidechain were occasionally crashing on Mac AU.
• Fix: A Windows message was poping when trying to access an unavailable drive.
• Fix: Upsampling latency wasn't reported correctly.
• Fix: Improved automation support with Ableton Live.
• Fix: Plugins didn't store bypass state.
• Fix: Multiparameters in switch mode were showing inverted state.
• Fix: Alt+Click in a graph editor caused maximum zoom, which is now disabled.
• Fix: Units in zoomed mode were sometimes showing invalid grid lines.
• Fix: Temp gain wasn't updated when automated/modulated.

MLimiter 4.02 changes

• Graph editors now show smart units even in zoomed mode and snap-to-grid works as well.
• Fix: Updaters didn't work on Windows with some specific paths.

MLimiter 4.01 changes

• Minor fixes and optimizations.

MLimiter 4.00 changes

• Major performance improvements - our plugins are now even faster than before on modern processors. We measured processing improvements of up to 300% with some plugins and user interface is now much faster as well, especially on Mac OS X.
• Online preset exchange - all plugins can now automatically share your presets on our servers and download new ones (if enabled of course). This way everyone can have an unbelievable set of presets using our extremely versatile plugins. We are building a community and you can be a part of it!
• ADSR editors (e.g. in modulators) can now have custom shapes.
• Added step-sequencer generator into any envelope/graph editor.
• When activating you can now use drag & drop, clipboard and also locate the licence file using a browser.
• Fix: Trigger and switcher multiparameter modes weren't working correctly.
• Fix: Modulators and multiparameters weren't learning correct parameters of signal editor.
• Fix: Plugins could crash on Win64 when project exceeded 2GB.
• Fix: Plugins crashed when moving a multiparameter during learning.

MLimiter 3.02 changes

• Kernel highly optimized, especially for plugins with visualization.
• Added envelope editor snap-to-grid feature and advanced envelope editor menu.
• Added stairs & pulses envelope point mode.
• Added disabled mode and improved harmonics processing in MMultiBandSaturator and MLimiter.
• Plugins are now temporarily bypassed for time consuming actions such as loading presets.
• Now the plugins released in bundles can also accept single plugin licences for easier installation and activation.
• Fix: Occasional freezing under problematic hosts such as Wavelab.
• Fix: Mono/stereo encoding was sometimes failing in Logic.
• Fix: Copy&paste of modulators could result in a hang.
• Fix: Installer could hang on some multiprocessor systems.

MLimiter 3.01 changes

• Added harmonics control.
• Added draw mode in graph editor, added middle mouse button drawing.
• Mouse wheel zooming in graph editors now zooms "to point".
• Improved analysis precision.
• Fix: Lock in envelope editor didn't lock the point completely.
• Fix: Modulator/multiparam learn deleted unchanged parameters relative to modified.
• Fix: Graph editor generated weird shapes for multiple points in the same position.
• Fix: Plugins could crash after receving program change.

MLimiter 3.01beta changes

• Multiparameters can now work as switchers or triggers, which modify target values over certain time period.
• Smoothness can be automated/modulated on every signal generator.
• Signal generator contains phase adjustments for harmonics.
• Multiparameters range can now be automatized and default value can be configured.
• Plugins are now reporting tail in VST3 and AU, which can be used by host for otimizations.
• Points of any envelope graph editor can now be locked.
• Fix: Multiparameter values weren't stored properly.
• Fix: Plugins weren't recognizing spacebar on Mac OS X.
• Fix: Copy&paste in color dialog in style settings didn't work.
• Fix: Installers on certain Windows system failed because of a missing system directory.
• Fix: VST3 compatibility with FL Studio.

MLimiter 3.00 changes

• Kernel heavily upgraded and optimized.
• A-H presets can be switched via program change MIDI message.
• Last randomization can be undone by holding shift and pressing Random button.
• Optional confirmations on destructive actions.
• Advanced oscillator shape processing graphs enabled only when turned on.
• Added bypass to the title.
• Fix: MIDI & general settings save/load.
• Fix: Preset selector couldn't expand/collapse folders.

MLimiter 2.09 changes

• Added automation/change protection for maximum & adjustable quality when changing parameters.
• ABCD morphing now automates only relevant parameters to save storage and minimize hosts CPU hit.
• Randomization & loading now reinitializes plugin to remove possible artifacts from previous state.
• Fix: Some help windows weren't sized correctly.

MLimiter 2.08 changes

• Advanced signal generator shape postprocessing - every signal generator now has advanced controls for skewing, adding harmonics and even graph-based shape and amplitude modification.
• Optimized processing for host without channel reporting, such as Reaper.
• Fix: Latency reporting.
• Fix: MS encoder wasn't working correctly.
• Fix: Multiparameters and parameters controlled by ABCD morphing weren't recording automation.
• Fix: Compatibility fixes for Wavelab.

MLimiter 2.07 changes

• Added LR/MS/L/R/M/S/LR-/surround processing - almost all plugins can now process stereo-mono, just left, just stereo and other combinations instead of left-right channels.
• Added random move feature - when you hold ctrl and press "Random" button, no new random settings are generated, but the current configuration is slightly modified. This is useful to tweak already interesting settings.
• Clumsy configuration menu replaced by a configuration window.
• Graphical improvements.
• Added help for equalizer band editors.
• Fixed several compatibility issues, especially on Mac OS X (Digital Performer) and Windows 64 (Cubase 5).
• Fix: Cancel in submit preset did send the preset anyway.
• Fix: Upsampling could crash on hosts with multicored initialization.

MLimiter 2.06 changes

• Improved upsampling algorithm performance.
• Improved compatibility with several hosts.
• Fix: Plugin reset removing tails.
• Fix: Multichannel processing wasn't optimized enough and caused crashes.
• Fix: AU MIDI input.
• Fix: Denormalization problems causing high CPU usage when processing silence.

MLimiter 2.05 changes

• Added mono and surround compatibility - most plugins can now handle from 1 to 8 channels.
• Fix: Denormals causing low speed of upsampling.

MLimiter 2.04 changes

• Added tree parameter selectors for easier workflow.
• Added integrated activation by drag & dropping your licence file into the plugin or using system clipboard.
• Improved upsampling filters.
• Improved style for better visibility.
• Added "Submit preset" to send settings to MeldaProduction to be included in next versions. Good preset creators may be awarded by free software.
• Improved Mac OS X compatibility.
• Fix: Upsampling could cause ceiling to 0dB.
• Fix: Assembler optimizations could cause problems.

MLimiter 2.03 changes

• ABCD morphing feature.
• High-quality upsampling engine.
• Added output gain parameter.
• Randomization improved to apply only on useful parameters.
• Improved Windows 64-bit and Mac OS X compatibility.
• Immediate editor resizing.
• Kernel optimizations.
• Improved Mac OS X installer.
• Fix: Text value editing in modulators, MIDI controllers and multiparameters.
• Fix: Drag using trackers outside of window caused jumping to the other side.
• Fix: Upsampling controller sometimes contained invalid value after loading.
• Fix: Upsampling could cause overs.

MLimiter 2.02 changes

• Added preset export & import.
• Preset storage optimized.
• Fix: Synchronization persistence.

MLimiter 2.01 changes

• Added multiparameters - automatable parameters, which control other parameters.
• Advanced zipper noise protection for automation.
• GUI has been optimized.

MLimiter 2.00 changes

• Stylable & resizable GUI engine.
• Switched to keyfile licencing.
• Kernel optimizations.
• Demo now shows intro window instead of the bottom big bar.
• Even harmonics range extended to 500%.
• Fix: Unnamed presets are avoided.

MLimiter 1.05 changes

• Added dry/wet parameter.
• MIDI controllers.
• Full randomization.
• Hierarchical preset management.
• Graph editors units highlighted for better visibility.
• Graphics has been optimized.
• Fix: Popup window minimization.
• Fix: 64-bit host support.

MLimiter 1.04 changes

• Added A-H presets and full settings copy/paste to clipboard.
• Added replace preset into preset management.
• Improved tracker control accuracy using Ctrl key.
• Display axes are now truly logarithmic.
• Help windows are now scrollable and can fit better for various resolutions.

MLimiter 1.03 changes

• Improved GUI.
• Fix: F1 caused crash under Wavelab.

MLimiter 1.02 changes

• Advanced preset management - now you can easily switch between presets, save new and delete existing.
• Performance improvement.

MLimiter 1.01 changes

• Added even harmonics control.
• Textual editation for all values (Shift + Click).
• Some rare kernel bugs resolved.